Optical Mounts

Contents:
Push Holder 4H29
Multiple Filter Holders 4FH56
Plate Clamp 4PC69
Universal Plate Holder 4PH132
Push Holder 4H29
- One holder for optics of various sizes
- Special method of fixation
- Holds optics from 13 to 42 mm diameter.
- Holds thin lenses or long-barrel lens assemblies
Push Holder 4H29 holds optics of any shape or configuration: round and rectangular, with negligible loss of clear aperture, even at large angles of incidence. The top support is clamped in position pushing the special place and tightening the knurled screw. This provides gentle but firm fixation. After mounting the component and holder can be exchanged completely as one unit.
Three mounting holes are provided in the black finished steel base of the holder. The Push Holder 4H29 can be locked using M6 knurled screws to Translation Stages, Tables or other STANDA elements.
Weight: 0.14kg

Multiple Filter Holder 4FH56
Multiple Filter Holder 4FH56 allows fixation of up to 6 filters. The thickness of the optical filter or plate to be held is from 2 mm to 6 mm.
The Holder is made of black finished steel. Separators are made of plastic. There are M6 tapped mounting holes which allow positioning like letters L or V.
Weight: 0.12kg
Plate Clamp 4PC69
Plate Clamp 4PC69 holds thin light-weight plates, like filters, transparencies, resolution targets and razor blades used in knife edge experiments.
These black finished steel Clamps may be directly screwed for example to the mounting stud of a Mounting Post 3MP6 or to a Base Plate with Rotary Clamp 3EXC45.
Weight: 0.04kg
Universal Plate Holder 4PH132
Universal Plate Holder 4PH132 holds long and thick components, and can fix elements from 0 to 12 mm in width. The base of the plate holder has an M6 mounting hole.
Weight: 0.07kg
e-mail: sales@standa.lt
http://www.standa.lt