Optical Mounts

Contents:
Optical Components Mount 4OCM
Universal Adjustable Lens/Optics Mounts 4LM149
Self-Centering Lens/Optics Mount 4LM13
Adjustable Radius Optics Mount 4LM42
Optical Component Mounts 4OCM
Optical Component Mounts 4OCM can be used for round, standard dimensions, thin optical elements attachment. Mounts vary in dimensions so as to support diameters from 10 to 50mm (0.5" to 2").
Original construction enabled to decrease the mount's dimensions and weight. It has additional fixing holes: one M6 and two Æ4.5.
4OCM is produced of black aluminium.
Model A, mm (") B, mm C, mm D, mm E, mm F, mm G, mm
4OCM-10 10 (0.5") 26 8 12 10 13.5 8.5
4OCM-20 20 33 17 12 10 18.8 13.8
4OCM-25 25 (1") 38 21 12 10 21.3 16.3
4OCM-40 40 53 36 18 16 28.8 23.8
4OCM-50 50 (2") 65 45 18 16 34.8 29.8
Universal Adjustable Lens/Optics Mounts 4LM149
- Hold cylindrical objects of various diameters
- Three mounting possibilities
- Convenient holding of tips not used at the moment
- Quick coarse positioning and diameter setting possibility
- Made of black anodized aluminium
Universal Adjustable Lens/Optics Mounts 4LM149-10 and 4LM149-05 are used to accommodate any round objects of any thickness like lenses, mirrors and lasers.
Three support shafts of holder are assembled with non-rotating V-groove aluminium universal interchangeable tips for lenses mirrors, etc. While not in use the new non-abrasive flat teflon face aluminium tips for lasers are kept in special holes on aluminium support ring.
Long objects like cylindrical laser heads can be held by two mounts together with Multiple Mounting Plates 2MP.
Each individual adjustable shaft of holder incorporates threaded thumbscrew, sliding sleeve and fixation tool for rough positioning and diameter setting. It is enough to give only a twist thumbscrew of the shaft to provide a fine adjustment travel.
Three various mounting holes M4, M6, and Æ6.4, Æ11x4 provides various and easy attachment possibilities to the Tables, Breadboards and the STANDA Rod Holder system.

 
Model A, mm B, mm C, mm Weight, kg
4LM149-10 164-210 158-185 38-103 0.3
4LM149-05 134-164 124-141 10-66 0.25

Changeable tips:
1:  2:
Self-Centering Lens/Optics Mount 4LM13

- Automatically centres and holds optics from 6 to 40 mm
- Easy insertion and removal of optics

Self-Centering Lens/Optics Mount 4LM13 reliably centres and securely holds round optics and cylindrical objects. This device is particularly valuable when lenses of different diameters are being used interchangeably, as repeated centering at constant height is necessary. The Self-Centering Lens/Optics Mount 4LM13 accommodates optics up to 40 mm and is oversized to provide easy finger access for inserting and remaining optics.

When released the three arms grip the lens in deep grooved jaws, automatically centering the lens within the holder.
The Self-Centering Lens/Optics Mount 4LM13 can mount on STANDA Posts for easy adjustment of vertical height and azimuthal angle.
Weight 0.15kg

Adjustable Radius Optics Mount 4LM42
- For lenses, mirrors, lasers - any round objects
- Lenses are easily removed and replaced
- Accommodate any lens shape and thickness
- Range of lens from 6 to 40 mm diameter
- Quick lens interchange

An Adjustable Radius Optics Mount 4LM42 provides rigid support and assured orientation for round objects of virtually any thickness and length.
Installing optics is easy: set the lower support rods at any desired radius, insert your element, and adjust the top rod downward for secure hold of the optics. Long objects can be held by two holders together with the Multiple Mounting Joist 2MJ63.
The black anodized aluminium rings have M6 tapped hole for attachment to any STANDA Stage, Table or Support, including STANDA Mounting Posts 3MP6. The Adjustable Radius Optics Mount 4LM42 has three black finished steel plungers and all of them are screw adjustable. This mount accepts lenses from 6 mm to 40 mm with edge thickness of up to 6.5 mm.
Weight 0.12kg

e-mail: sales@standa.lt
http://www.standa.lt