Motorized Positioners & Controllers
Motorized Translation Stage 8MT167-100
Motorized Translation Stage 8MT167-100 is designed on the base of 7T167-50 translator.
The movement is produced by a step motor through the reducing gear and a lead-screw. There are 1000 steps per millimeter.
Stepping Motors Berger Lahr RDM 253/50 or DSh 200-0,08 are used in the translator. The electrical parameters and connection schemes of the motors accompany individual units. The motors have 200 steps per revolution.
To drive the motor, we offer a controller 8SMCC1 separately. It connects to a computer. The controller, drives the motor by one step. If a controller is used in ½ step mode, there would be 400 steps per revolution. There are microstepping controllers, available from other manufacturers, which divide a step into 10 parts.
The specified maximum speed is that at 12Volts DC (standard of 8SMCC1). An external power supply is optional with 8SMCC1. E.g. at 24Vdc the speed may increase by upto 40%.
Mechanics of 8MT167-100 translators could be easily attached to any type of stepping motor or servo motor of your choice.
We change the motor or a controller on special request.
With the help of a Connecting Plate 3P167-100 and Angle Bracket 2AB167-100 it is possible to assemble the translator in two or three coordinates.
Reduction gear with a motor constitute a Lead Block of the stage. If it obstructs any specific space the lead block may be repositioned on the stage by detaching and replacing it in desired orientation or displacement. See diagrams below.

Specifications:
Tested with a controller 8SMCC1 in full step mode with the basic stepping motors at 12Volts DC:
Travel range....... 100 mm
Lead screw pitch... 0.5 mm
Resolution......... 1 µm
                  (1000 steps/mm)
Max. speed......... 0.7 mm/s
Load capacity
   Horizontal...... 7 kg
   Vertical........ 3 kg
Weight............. 1.4 kg		 3P167-100
Example of a connection plate for stacking in X-Y motion.
Possible mounting positions of the Lead Block
For clear bottom plate surface For clear top plate surface At different positions along the axis of the stage
Stages can be stacked for X-Y-Z motion using Connection Plate 3P167-100, and Angle Bracket 2AB167-100.
e-mail: sales@standa.lt
http://www.standa.lt
For best viewing: Alter text size as needed.