STA-01SH - Diode-Pumped Nd:YAG Solid-State Micro Laser

Diode-Pumped Nd:YAG Solid-State Micro Laser
 
TEM00 and pulsed spectral structure SLM
Applications:
Pump source for harmonic generators,
optical parametric oscillators and amplifiers
(using periodically poled KTP or LiNbO3 crystals)
Low-coherence "white light" interferometry
Test and measurement systems
Optical coherence tomography
Two-photon microscopy
Fluorescence microscopy
 

High peak powers with sub-nanosecond pulse lengths or high repetition rates at wavelengths 532 nm and are now available from Standa. This family of highly reliable, solid-state lasers consists of a power supply unit and laser head. The power supply unit includes a laser diode (LD) driver, fiber pigtailed LD, and internal pulse generator. The laser repetition rate can be operated in three different modes, and set by STANDA from single pulse or to max repetition rate agreed with customer in either pulsed LD pumping mode. STA-01SH - produces pulses of second harmonic.  Fundamental wavelength...

Table of Typical Micro Laser Models
Models STA-01SH-1 STA-01SH-2 STA-01SH-3 STA-01SH-4
Wavelength, nm 532
Average output power (max), mW 40 25 50 20
Pulse energy, µJ 4 5 50 0.2
Pulse width (FWHM), ns 0.5 < 0.7 0.5 0.5
Repetition rate (max), kHz 10 5 1 100
Beam Profile M2 < 1.1
Pulse spectral structure single longitudinal mode
Polarization ratio > 100:1
Beam Waist diameter
inside the laser head 1/e2, µm*
25-200
Pulse spectrum FWHM, pm < 5 (near transform limited)
Pulse to pulse energy stability RMS < 0.5
Power stability over six hours** < ± 1,5%
External power supply voltage, V AC 100-240
Operating temperature, °C 22±11, non-condensing
Interfaces USB, External trigger (TTL rising edge) 1HZ...max repetition rate
Laser head dimensions:
  diameter, mm 25
  length, mm 76.5
Warranty 12 months or 5000 hours whichever occurs first

1 - Is specified an ambient temperature at which the laser parameters exactly meet the specifications in the table.

Specifications are subject to changes without advance notice.

*Waist position depends on model
** After 5 to 10 minutes warm-up and temperature variation of <±3 °C and <3 °C/hour.

OEM Manufacturing services. Standa provides contract manufacturing services for application - specific Lasers. Please call your local Standa distributors or Standa office for more information.


Example of Fiber coupling assembly

 
Ordering Information
Model
STA-01SH-1
STA-01SH-2
STA-01SH-3
STA-01SH-4
 


Diode-Pumped Nd:YAG Solid-State Micro Laser