High Power Detector - Light Test & Measurement Instruments - Catalog - Opto-Mechanical Products

11SUPER-HP - High Power Detector


		The Highest Power Handling Custom models handle up to 25 000 W of continuous power. Higher powers are available upon request
		Stable Reading Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market
		Infinite Customization Capabilities 1. Choose YOUR size 2. Choose YOUR maximum power 3. We will customize one just for you!
		Compact and Light Weight Lighter and more compact than any other high power detector on the market, thanks to our unique design
		Direct USB Connection to a PC Each head comes with both a DB-15 connector (for use with a Standa monitor) and a USB2.0 output for direct connection to a PC. Other connectors available upon request

Model (custom built)	11HP280/100A-10KW-HD	11HP210A-25KW-HD
Max average power (continuous / 5 minute)	10 000 W / 10 000 W	25 000 W / 25 000 W
Effective aperture	280 x 100 mm	210 x 210 mm
Cooling method	Water-Cooled	Water-Cooled
MEASUREMENT CAPABILITY
Spectral Range	0.19 - 20 µm	0.19 - 20 µm
Noise Equivalent Power ¹	±10 W	±10 W
Minimum Average Power ²	300 W	300 W
Rise Time (nominal)	20 sec	25 sec
Sensitivity (typ into 100 kΩ load)	0.2 mV/W	0.08 mV/W
Calibration Uncertainty
@ 1064 nm	±5 %	±5 %
@ 810 nm	±6 %	±6 %
Repeatability	±2 %	±2 %
Linearity with Power	±2 %	±2 %
Linearity vs Beam Diameter ³	±2 %	±2 %
DAMAGE THRESHOLDS
Maximum Average Power Density ⁴
10 kW	2.5 kW/cm	2.5 kW/cm²
25 kW	---	0.25 kW/cm²
PHYSICAL CHARACTERISTICS
Effective Aperture	280 x 100 mm	210 x 210 mm
Absorber (High Damage Threshold)	HD	HD
Required Cooling Flow	(6 - 10) LPM < ±1 LPM/min ⁵	(12 - 15) LPM < ±1 LPM/min ⁵
Temperature of Cooling Water	(15 - 25) °C < ±1°C/min ⁵	(15 - 25) °C < ±1°C/min ⁵
Output Connectors	DB-15 cable & USB port	DB-15 cable & USB port
PCB Electrical Supply	Through USB or Standa monitors	Through USB or Standa monitors
Maximum Output Signal	2 V	2 V
Dimensions	152H x 305W x 75D mm	229H x 229W x 80D mm
Weight (head only)	11 kg	16 kg

1. Nominal value, actual value depends on electrical noise in the measurement system.
2. For lower powers, call your Standa representative.
3. For a centered beam with size from 20% to 80% of the total aperture.
4. At 1064 nm, 1.07-1.08 µm and 10.6 µm.
5. Average period > 1 min.

Compatible Monitors:

Ordering Information

Model

11HP210A-25KW-HD

11HP280/100A-10KW-HD

High Power Detector