12 mm diameter stainless steel mounting posts have M4 and M6 holes on the ends. Each post can be attached directly to a base surface using adapters.
Stainless Steel Mounting Posts have 8-32 and 1/4-20 holes on the ends. Each post can be attached directly to a base surface using adapters.
It provides two lines of contact, thus the position of a precision mounting post becomes definite. Inch / metric.
Allows the post to be rotated without changing height.
Two sets of posts, post holders, base plates and clamps
Solid (Ø 25 mm) stainless steel rod. Random positioning. Exceptional stability.
Tool to secure mirror holders and other tools on Ø32 mm and Ø25 mm posts
13 mm travel range, 1 mm of translation per revolution of adjustment ring
Are used for mounting Fixed Pedestals or Silent Rods to tables. Suitable for 3MP25 pedestals and for 2SR32 rods.
Join Ø32mm rods and Ø12mm posts at variable angles.
It is used to fasten components at random positions where they cannot be fastened directly to the optical table.
Aluminium fixed (non-adjustable) 90° (right angle) clamps are designed for posts 12 mm. Clamps For 0.5" available on request.
Using it can positioned any Standa base and most base mounted components at any angle on the table and have not to be limited by mounting hole pattern of the optical table.
Are designed to position posts and post holders. Is fastened by mounting slots.
Are flat, slotted plates designed to ensure mounting of various opto-mechanical components at random position.
Are used to clamp posts and post holders in random positions.
Designed for attaching translation stages, rotation stages and etc...
Allows M6 threaded post holder 3PH or other components to be cost effectively positioned and locked on X and Y-axes.
Are used for mounting posts ands posts holders to position them at random. The post stays stable without fastening.
Allows to fix Kinematic Mirror/Beamsplitter Mounts on 45o angle
Allows mounting of optics at 45° angle
Base plate designed for 8MVT120-5, 8MVT120-12, 8MVT120-25 vertical stages
Base plate for 7T67-6
Base plate for Mini Rotation Stage 7R7
Designed for 7T25-10
For 5KVDOM series and its modifications
Are designed to use with appropriate base plates to elevate the optical axis of mirror and lens mounts.
Universal base plate for manual and motorized stages: 7T67, 7T68, 7T175, 8MT175, 8MT50, 8MT167-25, 8MT177-100, 8MT193-100, 8MT200-100
Are the combination of the Riser Block and the Base Plate.
Small components may be quickly positioned on ferromagnetic optical tables, breadboards or translation stages.
Highest holding force - up to 140 kg. Nonmagnetic mounting surface. Low field leakage.
Connect components when precise orientation is not required.
Is useful in connecting elements when specific orientation plane is required.
Is suitable for tightening all standard Hex Screws. Made of steel.
Used for fastening motorized actuators and in other applications.
Kit containing most needed screws, washers and hex keys when working with Standa equipment.
Can be screwed by hand and tightened using a spanner. Thread size is M6.
Are driven with 5 mm hex key. The screws come in three sizes.
Is used to protect surface from scratches and to provide more stable tightening.
These clamps are used to fix the accessories to the mounting platform.
© 2010 STANDA LTD. All rights reserved.P.O. BOX 377 , 03012 Vilnius, Lithuania; phone: +370 5 2651474; fax: +370 5 2651483; e-mail: sales@standa.LT