Total stainless steel, precision and long-term stability0.5" (12.7 mm) optics
designed to minimize mount-induced wavefront distortions.1" (25.4 mm) optics
designed to minimize mount-induced wavefront distortions.1.5" (38.1 mm) optics
designed to minimize mount-induced wavefront distortions2" ( 50.8 mm) optics
designed to minimize mount-induced wavefront distortions3" ( 76.2 mm) optics
designed to minimize mount-induced wavefront distortions4" ( 101.6 mm) optics
±2.5° angular range. True gimbal design. Graduated adjustment knobs.
1" (25.4 mm) optics. Hardened steel drive for stability. Lightweight aluminium body.
Flips 1" optics in and out of the experiment
Flip 50.8 mm (2 inch) optics in and out of the optical scheme. 49 mm clear aperture. Open edge. Tilt/tip range 9°. Repeatability 20 µrad.
For 12.7 mm (0.5 inch) and 25.4 (1 inch) diameter optics
Flip optics in and out of the optical scheme
Sensitivity of 3 arcsec and 1 µm. 1”, 2”, 3” Inches apertures. Tilt range 9° (about two axes).
For 12.7 mm (0.5 inch) diameter optics. Tilt/tip range 14°. Travel - 4mm. Kinematic design.
1 inch optics. Appealing design. Hard seats of steel or sapphire under driving screws.
1-inch optics. Precise and handy adjustments, those angular in two orthogonal planes, and linear
Are universal, durable, and render very stable adjustment. See more description inside.
1, 2, 3, 4 and 6 inch aperture mounts that ideal for precision adjustment.
Provides fixation and adjustment for up to 6 filters.
Two types of mounts with 0-28 mm and 22-52 mm aperture are used
Has a platform and allows holding wider optics.
Combination of a platform for wider optics and additional filter holder.
For Ø1" (25.4 mm) optics. Polarizer may be transformed into a rotation stage.
For Ø1" and Ø2" optics. Continuous 360° rotation. Scale reset option available
For Ø1", Ø2", Ø3" optics. Two scales for applications with limited space
For Ø1" (25.4 mm) optics. 360° continuous rotation. ±5° of fine rotation when locked
For Ø1" (25.4 mm) optics. Kinematic design. Tilt/tip range ±2°
For Ø1" (25.4 mm) optics. High stability L-shaped flat spring. Tilt/tip range ±2°.
Provides 360° rotation around the optical axis. Tilt at 9° range, with sensitivity of 5 arcsec.
For Ø1" (25.4 mm) optics. Provides rotation together with 2-axis precision displacement (±2 mm)
Is designed for adjustments of beamsplitters. The aperture has a rest-flange around its edge designed to stop optics inside.
For 1 inch optics. Precision kinematic control is provided by M6x0.25 screws.
On one side the edge of the optics stays clear. Helps in dense optical schemes.
On their platforms are Ø31.8 mm or Ø50 mm apertures. They are designed for precise orthogonal adjustment of mirrors.
Is used for precise adjustments of standard microscope objective lenses and ensures low-cost positioning of a focus point.
Is suited for precise adjustments of standard mirrors that can be directly bound to it, also used in horizontal position as a tilt table.
For precise adjustments of standard microscope objective lenses and ensures low-cost positioning of a focus point
Is designed to adjust beamsplitters measuring Ø25 mm. Fixing screw with a plastic tip clutches a beamsplitter against stainless steel rests.
The Large Aperture Optical Mount 5LAM124T on its platform has Ø31.8 mm aperture and three M4 mounting holes. It is designed for precise orthogonal adjustment of mirrors.
The mount may also be used in horizontal position as a tilt table. Then it can be used to align opto-mechanics around two axes.
Original stabilized L-shaped flat spring. Appealing design. Pick-hollows ease lifting of 1" optics by fingers. Tilt/tip travel range ±2°.
Dimensions most compact among 1-inch optics mounts. Tilt/tip range ±2°. Sensitivity 3 arcsec.
Compact design for dense optical schemes. Stable design.
Tilt/tip ±5° about two orthogonal axes. Hardened seats under driving screws. Sensitivity 10 arcsec
Enables to greatly increase the thickness of optical elements as it has a convenient access to the regulation handles
The extremely small mount has small driving screws with a hexagonal head or a hexagonal keyhole.
Are provided with extended back for convenient mounting in the horizontal or vertical position.
Provides smooth and precise adjustment with sensitivity of 10 arcsec.
2 or 3 axis, Tilt/tip travel range ±1,5°, Optics diameter 115÷250 mm, Sensitivity 0.5 arcsec, Load capacity 6 kg
For any optics size from 300 to 500 mm in Ø with weights up to 30 kg.
300 mm clear aperture; tilt range >3°, high precision & stability.
5-100mm optics diameter range. Additional translation possibility through X axis in the range of 25 mm.
Compact design, 4-axis equipped with 100TPI driving screws, fifth axis goes as zoom option.
Adapter 5KOMA1 is used with 5KOM5-1, 5KOM5F-1 and 5TOM3-1 for mounting the objects having M27x1 thread from the backside of the mount.
360 coarse rotation and 4° fine rotation. 150 kg load! High thermal and vibration stability. Near zero Backlash
Travel range 3 mm. The movable carriage could accept Ø25,4 optics up to 9mm thick.
±2 mm translation range. Compact, stable, high sensitivity, smooth motion.
Stable vertical translation of 25mm travel. It allows defining the height of a platform with 20 µm sensitivity.
Are compact mounts designed to precisely position optical components in the plane orthogonal to the optical axis.
has two screws to adjust the pinhole about two axes in 5 mm range. On request we supply pinholes.
provides basic mounting for prisms, beamsplitter, cubes and etc
Designed for precise adjustments of various optical components which can be directly bound to it
Fixed Optics Mounts, Optical Components Holders, Optic Clamps...
Standa is having a continuous sale of discontinued products and stock overflow. New products for sale are added regularly.Visit our sale page!